Cutting Edge Solutions Offer Low Noise and Low Power for Multi-Axis Inertial Sensors
CAIRO, Egypt – June 2, 2014 – Si-Ware Systems (SWS), a premier provider of IC- and MEMS-based solutions for industrial and consumer applications, will be showcasing its newest, cutting edge, consumer grade ASIC solutions for inertial sensors this week at Sensor+Test in Nuremberg Germany.
The SWS1202 is a 6-axis inertial sensor interface IC that includes a dedicated I2C interface to an external 3-axis magnetometer, creating a 9-axis device for motion tracking in portable consumer devices. It boasts superior analog performance, achieving a noise level of 0.005 dps/√Hz for angular motion and 200 μg/√Hz for linear motion at only 3.3mA with all axes active. It also features a low power intermittent mode for acceleration data acquisition, consuming less than 20μA at low sampling rates (10 samples).The SWS1202’s 1μA sleep current (while retaining user register data), along with its extensive self-sleep and self-wake interrupt functions, enable very low total power consumption providing a key benefit in battery operated devices.
The second ASIC is the SWS1220, which is a 2-axis MEMS gyroscope interface IC targeted for OIS applications and other consumer applications requiring low power and cost. It achieves excellent noise performance (0.0065 dps/√Hz) and low power (3.7mA with both axes active, 5uA sleep). It includes a regulated voltage charge pump for high voltage MEMS actuation/excitation.
Both ASICs have small footprints with minimal external components, allowing for low cost sensor module solutions to be developed.
SWS has a portfolio of silicon-proven IP in the inertial sensing area. It is currently supplying ASICs in volume to a number of MEMS inertial sensor suppliers that are selling high performance gyroscopes and accelerometers. SWS also offers its unique development platforms to MEMS developers that drastically reduces the development time for inertial sensors. The development platforms have been used successfully across a range of inertial sensors, from high performance to consumer.
“SWS has a proven track record in providing best in class electronics solutions for high performance MEMS based inertial sensors,” said Amr Hafez, ASIC Solutions Division Manager at SWS. “We have now extended that expertise to the consumer inertial sensing domain. The small size of the SWS1202 and SWS1220, their low power, and superior performance make them an excellent solution for MEMS and piezo sensor developers seeking to bring to market best in class products.”
Key features of the SWS1202 include:
• Wide supply range, 1.7 to 3.6 V
• Multi-segment 2nd order temperature compensation, with on-chip temperature sensor
• Dedicated programmable self-sleep/wake and motion detection interrupt controller
• 10-channel FIFO with stream, bypass, and FIFO mode
• Self-diagnosis functions
• Programmable DSP filtering, scale-factor, and offset correction
Key features of the SWS1220 include:
• Wide Supply range, 1.7V to 3.6V
• Multi-segment 2nd order temperature compensation, on-chip temperature sensor
• Integrated self-test feature, programmable interrupts, FIFO
• External sync pin to support image, video, and GPS synchronization
• Internal voltage charge-pump for MEMS actuation up to 6V
• Programmable DSP filtering, scale factor, and offset correction
The SWS1202 and SWS1220 are validated in silicon and are available for sampling and evaluation.
SWS at Sensor+Test
SWS is showing its ASIC solutions for MEMS sensors at Sensor+Test in Nuremberbg Germany being held this week from June 3rd through June 6th. SWS has its stand in Hall 12 stand number 12-491.
SWS is an independent fabless semiconductor company providing a wide spectrum of product design and development solutions, custom ASIC development and supply, as well as standard products. SWS has three divisions: ASIC Solutions – MEMS interface ASICs; Timing Products – all silicon oscillators; and Optical MEMS Technology – MOEMS products. The ASIC Solutions division provides custom ASIC development and supply specializing in MEMS interfaces. The Timing Products division has developed a breakthrough technology in its all silicon Self Compensating Oscillator (SCOTM). The Optical MEMS technology division offers it unique platform – Silicon integrated Micro Optical Systems Technology (SiMOSTTM) that allows the creation of multiple optical components on silicon. For more information, please visit https://www.si-ware.com.
Scott Smyser, EVP, W/W Marketing & Business Development
Tel.: +1 818 790 1151