Unground triticale

• Dear Customer,
• When QUALITY, ACCURACY and SERVICE are key elements in your decision for the right partner in delivering calibration lines; NutriControl B.V. is your best choice!
• NutriControl supports you with the most accurate calibration lines and supporting services. We are working from a cloud based solution where we are developing the most accurate and robust calibration lines for your Neospectra device.
• Using only our highest standards of wet chemistry from our own accredited laboratory makes us unique. All calibration lines are being developed on unground material for field conditions, so that you will be able to gather fast and accurate results in the field! All calibration lines are updated on a monthly basis to guarantee that you work with the most accurate model possible.
• If you have any deviation results or questions about a measurement, you can always sent the sample to NutriControl and we will make sure the sample will be analyzed and added to the calibration line, to assure the highest accuracy for your measurements!
• Closer cooperation can result in adding your Neospectra to our ring test service, so that you can assure the performance of your device and show this for example to your customers auditor.
• NutriControl can offer additional calibration lines for this product, such as fiber, ash, starch and many more. On top of that we have our own unique mobile concept for fast and easy measuring on the spot. Please contact NutriControl for these possibilities at https://www.nutricontrol.nl/over-ons/contact-locaties/
• All calibration model setup are performed according to the NEN ISO 12099; 2017 working principals. Wet chemistry methods are mainly following the GMP+ legislation and are accredited based on the most often used official certification regulation for this product. For more information, please contact NutriControl: https://www.nutricontrol.nl/over-ons/contact-locaties/
• Moisture; proximate analysis determined by weight reduction after a pre-determined heat treatment for a certain period of time (depending of the method).
• Protein; Kjeldahl method for determining the nitrogen content with in the product. The number shows the multiply factor for the protein calculation.
• Fat; weight determination of the extracted fat, the abbreviation determines if Soxhlet, acid hydrolysis or any other method was used.

‍

• The product needs the be unground material.
• The Product should be in direct contact with the lens of the NeoSpectra.
• The minimum layer of the material should be 3cm.
• Scan at 5 different spots of the material.

‍